News -

How to solve the problem in the operation of the capping machine
24-07-2020
As a capping device with high packaging efficiency and a wide range of applications, it is inevitable that failures will occur after long-term use, so today I will talk about possible problems and sol...
Working steps of filling and capping machine
17-07-2020
Working steps of filling and capping machine (1) Transmission principle: The motor transmits the power to the worm gear shaft of the reducer through the pulley, and then the worm gear shaft passes thr...
Material and process for making plastic bottle caps
10-07-2020
In the packaging industry, hot filling beverage bottle caps have very large advantages: first of all, they have very good barrier properties. The barrier properties of light, air and water are very go...
Analysis of common problems in coordination between wine bottle and bottle cap
03-07-2020
The problem of coordination between wine bottles and bottle caps directly affects the functionality of wine products, and is the root cause of major quality problems such as leakage, picking up, and s...
Blowing setting process of automatic blow molding machine
28-06-2020
Bottle blowing machine refers to equipment for blowing bottles. The simple explanation is that this machine can blow plastic particles (softened into liquid) or good preforms into bottles through tech...
Why are there 21 teeth on the beer bottle cap?
19-06-2020
Speaking of beer, there is a very interesting phenomenon that everyone may have never noticed. That is, there are not more than 21 jagged teeth on the beer bottle caps, and the number of jagged teeth ...